How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback with a unique engine configuration. It’s not the most quiet, but still fun to drive.
Replace the battery in the key fob of your Nissan Juke every two years, or when it’s low. It’s easy to replace at home, however you’ll need some tools.
Dead Coin Battery
If your Nissan Juke key fob isn’t working the first thing you should check is the coin battery that is inside it. It could be dead and must be replaced. This is a simple fix that will take only several minutes. Flip the fob upside down so that you will be able to access the tiny latch/release located at the back. Replace the battery that was in use with the new one, making sure it’s on the bottom of the fob. The two halves of the fob carefully.
The fob should be cleaned if it was exposed to water before you are able to install the new battery. This can be accomplished by using a paper towel along with isopropyl alcohol or Nissan Juke Spare Key electronic cleaner, and then allowing it to dry completely before re-inserting the battery.
The key fob must also to be linked to the car in order to begin the engine, which can be done by following the instructions in the owners manual or an OBDII scanner. The most likely reason the key fob was not working is that it wasn’t paired. A malfunctioning chip inside the fob can also cause it to cease to function, but this is rare. In this instance the need for a new receiver module could be needed. If this is the situation, it’s best to be replaced by an authorized technician.
Water Damage
The key fobs are battery-operated, and the batteries should be replaced every two years, or when the car stops responding when hit the «start» switch. Keys have rubber seals to keep water out, however placing the key in the ocean or pool can damage the chip inside the. If this is the situation, you will have to purchase a new key from Nissan or an automotive locksmith.
It’s possible that the computer has lost connection to the key fob and this could be caused by a variety of factors. It can be fixed by restarting the car. If the «Key ID error» message continues to appear then you should contact Nissan for assistance.
Three common causes are dead battery on the key fob, a key that is not programmed, or a damaged key fob that is damaged. The first two issues are simple to fix, while the third is more difficult to fix immediately, but it is generally fixable by a little patience. Compare Nissan Key Replacement prices near you with WhoCanFixMyCar and schedule your repair online. It only takes a few minutes, and you can even review customer reviews from local garages, Nissan car mechanics and dealerships before you decide.
Faulty Chip
The key fob of your Nissan Juke contains a special chip that transmits a signal to the vehicle whenever you turn it. The key might be inoperable if the chip is faulty. In this case it is only possible to repair the issue by replacing the key. The nissan spare key Juke key may be damaged due to several reasons, such as water damage or a dead coin-battery.
If your key fob stops working after an immersion in the wash or even a bath, you must check the chip for water damage. Make sure the metal retainers are in good shape and that the chip is not exposed to water. If you notice any signs of water damage, try taking off the battery and wiping down the electronic component using isopropyl ethanol or electronic cleaner.
If the chip is not working If the chip is defective, you must visit the local locksmith or dealership. They will need the year as well as the model, make and year of your vehicle in order to locate the replacement nissan key fob. Also, you will need to write down the VIN (Vehicle Identification Number) so that the locksmith or dealer can identify the key you own. This will allow them to verify the correct key code and ensure they are cutting the correct one.
Faulty Receiver Module
The key fob transmits a radio frequency signal to your car in order to perform several functions. It can open your trunk while you hurry with your groceries to the car or even start your car by pressing an icon on the fob. It can also open your windows and turn on the horn if you accidentally lock the keys inside your car.
If the key fob does not function, it could be due to a problem in the receiver module. The receiver modules are tuned to receive specific frequencies that correspond with the signals sent by the Nissan key fob. A damaged receiver module can prevent your car from responding to the signal received by the key fob of Nissan.
Whatever way your Nissan key fob ends up getting damaged, it’s always good to have a spare in event that the key is broken or lost. A spare key can be programmed by a locksmith or a dealership to work with your nissan key programming and will save you the difficulty of locking your keys inside your vehicle or losing them.
If your Nissan Juke’s key fob was exposed to rain or clean tap water, you can fix the issue by cleaning it using isopropyl, or an electronic cleaner. If, however, the chip is damaged and you need to purchase a replacement key fob, which can be encoded to your car by a locksmith or dealer.